Fender Showman Owner Manual - Page 11
Operation, Effects, Loop. - meaning
View all Fender Showman manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Fender Montreux, London Reverb, Showman The Effects Loop is a feature of this amplifier that allows signal processing devices (phaser, chorus, digital delay. etc.) to be placed, signalwise, between the preamp and power sections. it has on OUT Jack (send) that feeds the preamp signal of the amplifier to the signal processor. The LEVEL Control matches the preamp signal with that of the signal processor and is set at the highest level the device can handle without overload or distortion. The IN Jack (return) feeds the processor signal to the power amp section of the amplifier. The LEVEL Control matches the output of the signal processor to the level requirements of the power amp. Operation of the Effects Loop. Before connecting the signal processor, connect your instrument to the amplifier instrument input (front panel) and adjust the controls to the setting you will be using. Turn down the Effects Loop SEND LEVEL Control and plug in the signal processing device. Switch the amplifier to the channel with the highest level setting that you will be using. While the instrument is being played. adjust the SEND LEVEL Control to the maximum level that can be obtained without distorting or overloading the signal processor. Adjust the signal processor controls as necessary (Please consult the signal processor owners manual for their operation and level capabilities). Adjust the RETURN LEVEL Control so the proper output level is maintained when the signal processor is bypassed by the devices switching or discon- nected from the Effects Loop. Additional notes: The SEND Jack of the Effects Loop is always active. This means that if you need a preamp signal to an instrument tuner, another amp, or to a recording console, it is available with a level control (SEND LEVEL) in the circuitry that will control the output signal strength. 4!,