Fisher and Paykel CDV2-365HN N Installation Guide - Page 16

Installer Final Checklist

Get Fisher and Paykel CDV2-365HN N PDF manuals and user guides View all Fisher and Paykel CDV2-365HN N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

14 INSTALLER FINAL CHECKLIST US CA GENERAL o Placement of Unit. o Specified clearance maintained to cabinet surfaces. o Unit Level- front to back, side to side. o All packaging material and tie straps removed. ELECTRICAL: o Receptacle with 15 ampere circuit protection is provided for service cord connection. o Adequate ground connection. GAS SUPPLY: o Connection: 1/2" NPT flex line with a minimum 5/8" diameter. o The pressure regulator which is connected to the manifold is set for 4.0" W.C. for Natural Gas or 10" W.C. for LP. o Manual gas shut-off valve installed in an accessible location. o Unit tested and free of gas leaks. OPERATION: o All internal packing materials are removed, ie below grates, around knobs, etc. o Knobs turn freely and correctly. o Each burner lights satisfactorily, both individually and with other burners operating. o Low flame operation verified. o All burner caps, burner rings and burner bases correctly seated in position, level, and do not rock or slide. o Burner grates correctly positioned, level, and do not rock.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
14
US
CA
GENERAL
o
Placement of Unit.
o
Specified clearance maintained to cabinet surfaces.
o
Unit Level- front to back, side to side.
o
All packaging material and tie straps removed.
ELECTRICAL:
o
Receptacle with 15 ampere circuit protection is provided for service cord connection.
o
Adequate ground connection.
GAS SUPPLY:
o
Connection: 1/2” NPT flex line with a minimum 5/8” diameter.
o
The pressure regulator which is connected to the manifold is set for 4.0” W.C. for Natural Gas or
10” W.C. for LP.
o
Manual gas shut-off valve installed in an accessible location.
o
Unit tested and free of gas leaks.
OPERATION:
o
All internal packing materials are removed, ie below grates, around knobs, etc.
o
Knobs turn freely and correctly.
o
Each burner lights satisfactorily, both individually and with other burners operating.
o
Low flame operation verified.
o
All burner caps, burner rings and burner bases correctly seated in position, level, and do not rock or slide.
o
Burner grates correctly positioned, level, and do not rock.
INSTALLER FINAL CHECKLIST