Fisher and Paykel DE60FA2 Dryers DE70FA* & DG70FA* User Guide (English, Sp - Page 19

Exhaust Venting

Get Fisher and Paykel DE60FA2 PDF manuals and user guides View all Fisher and Paykel DE60FA2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Exhaust Venting US CA WARNING Fire Hazard Use metal exhaust duct. Do not use a plastic exhaust duct. Do not use thin metal foil exhaust duct. Failure to do so can result in death or fire. 1 Read the exhaust section (pages 13 - 18) before installing the exhaust system to determine the maximum allowable exhaust duct length. Do not use sheet metal screws when assembling ducting. Always use suitable duct tape. Never use plastic or thin metal foil flexible exhaust material. 2 The exhaust outlet is located close to the center of the rear of the dryer. Make sure you join the exhaust duct to the dryer with duct tape only. This will prevent lint and dust from escaping from the dryer and exhaust system. Exhaust outlet 114mm (4 /") 298mm (11 /") 3 The exhaust vent can be routed up, down, left, right or straight out the back of the dryer. Refer to diagram. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
19
Exhaust Venting
WARNING
Fire Hazard
Use metal exhaust duct.
Do not use a plastic exhaust duct.
Do not use thin metal foil exhaust duct.
Failure to do so can result in death or fire.
Read the exhaust section (pages 13 – 18) before installing the exhaust system to determine the
1
maximum allowable exhaust duct length.
Do not use sheet metal screws when assembling ducting.
Always use suitable duct tape.
Never
use plastic or thin metal foil flexible exhaust material.
The exhaust outlet is located close to the center of the rear of the dryer.
Make sure you join the
2
exhaust duct to the dryer with duct tape only.
This will prevent lint and dust from escaping from
the dryer and exhaust system.
The exhaust vent can be routed up, down, left, right or straight out the back of the dryer.
Refer to
3
diagram.
US
CA
Exhaust outlet
298mm (11 /”)
114mm (4 /”)