Fisher and Paykel DE62T27GW2 SmartLoad Clothes Dryer Installation Instructions - Page 24
Power Supply Cord Requirements for U.S.A, for Electric Models Only
![]() |
View all Fisher and Paykel DE62T27GW2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Power Supply Cord Requirements for U.S.A for Electric Models Only Only a UL listed power-supply cord kit a suitable length for the installation and rated 120/240 V min, 30 A and marked with use for clothes dryers shall be used. This shall have ring terminals to connect to the dryer. The UL-rated strain relief included with it shall be suitable for a 1 1/8" (28.5mm) hole. If your outlet looks like this Choose this power supply cord 3 wire 4 wire Connecting by Direct Wire Power supply cable must match power supply (4-wire or 3-wire) and be: Flexible armoured or non-metallic sheathed copper cable (with ground wire). All current-carrying wires must be insulated. 10 gauge AWG solid copper wire (do not use aluminium wire). Suitable length for the installation. A UL approved strain relief must be used. Grounding for a Direct Wired Appliance This appliance must be connected to a grounded metal permanent wiring system, or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal on the appliance. 24
![](/manual_guide/products/fisher-paykel-de62t27gw2-smartload-clothes-dryer-installation-instructions-user-guide-english-04fa5ef/24.png)