Fisher and Paykel GWL11 User Guide - Page 30

Caring For Your Ecosmart - beeps and won t turn on

Get Fisher and Paykel GWL11 PDF manuals and user guides View all Fisher and Paykel GWL11 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Caring For Your Ecosmart Care and Cleaning When you have finished Turn off the faucets to prevent any chance of flooding should a hose burst. Unplug the machine from the wall socket. Cleaning your Ecosmart Clean with a soft damp cloth and wipe dry. Do not use chemical or scouring cleaners as they can damage the paint and plastic surfaces. You can remove the lid for cleaning. Open the lid fully, hold one side with one hand and gently tap the other side with an upward motion. To replace the lid, hold the lid vertically and align both hinges before pushing down firmly. To remove the agitator for cleaning, unscrew the nut down the center of the agitator by turning counter-clockwise. CAUTION! The agitator must be fully pushed on to the shaft when refitting. Tighten the plastic nut firmly by hand. Ensure the agitator is not loose. Cleaning the Fabric Softener Dispenser When using fabric softener, rinse your dispenser at the end of each wash, using warm soapy water. Separate the cup from the dispenser body by pushing downwards on the base of the cup. Cleaning the Inside of your Ecosmart You can program a hot wash into your Favorite cycle to thoroughly clean your machine. 1. Press POWER button. 2. Press and hold the Favorite cycle button until you hear two quick beeps and the Favorite light flashes. 3. Select the Permanent Press cycle. Push cup through dispenser with thumb 4. Select a hot wash. 5. Press Favorite again to store the selection. 6. The Ecosmart will then fill with hot water and do a hot wash. It's a good idea to clean the machine 30 using this cycle without clothes and a couple of cups of powered detergent, every few weeks.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
30
Caring For Your Ecosmart
Care and Cleaning
When you have finished
Turn off the faucets to prevent any chance of
flooding should a hose burst.
Unplug the machine from the wall socket.
Cleaning your Ecosmart
Clean with a soft damp cloth and wipe dry.
Do not use chemical or scouring cleaners as they can
damage the paint and plastic surfaces.
You can remove the lid for cleaning. Open the lid fully,
hold one side with one hand and gently tap the other
side with an upward motion.
To replace the lid, hold the lid vertically and align
both hinges before pushing down firmly.
To remove the agitator for cleaning, unscrew the nut down
the center of the agitator by turning counter-clockwise.
CAUTION!
The agitator must be fully pushed on to the shaft when refitting.
Tighten the plastic nut firmly by hand. Ensure the agitator is not loose.
Cleaning the Fabric Softener Dispenser
When using fabric softener, rinse your dispenser at
the end of each wash, using warm soapy water.
Separate the cup from the dispenser body by
pushing downwards on the base of the cup.
Cleaning the Inside of your Ecosmart
You can program a hot wash into your Favorite cycle
to thoroughly clean your machine.
1.
Press
POWER
button.
2.
Press and hold the Favorite cycle button until you
hear two quick beeps and the Favorite light flashes.
3.
Select the Permanent Press cycle.
4.
Select a hot wash.
5.
Press Favorite again to store the selection.
6.
The Ecosmart will then fill with hot water and do a hot wash.
It’s a good idea to clean the machine
using this cycle without clothes and a couple of cups of powered detergent, every few weeks.
Push cup through
dispenser with thumb