Fisher and Paykel MO-24SS MO-24SS Microwave oven manual (English) - Page 5
Unpacking and Installation Instructions - dcs 24
View all Fisher and Paykel MO-24SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Unpacking and Installation Instructions Unpacking and Examining Your Oven Remove: all packing materials from inside the oven cavity; however, DO NOT REMOVE THE WAVEGUIDE COVER, which is located on the right cavity wall. Read enclosures and SAVE this manual. Check the oven for any damage, such as misaligned or bent door, damaged door seals and sealing surfaces, broken or loose door hinges and latches and dents inside the cavity or on the door. If there is any damage, do not operate the oven and contact your dealer or DCS AUTHORIZED SERVICER. Choosing a Location for Your Oven on the counter You will use the oven frequently so plan its location for ease of use. It's wise, if possible, to have counter space on at least one side of the oven. Allow at least 2 inches on the sides, top and at the rear of the oven for air circulation. Choosing a Location for Your Oven if built-in Your oven can be built into a cabinet or wall by itself or above the models listed below using a DCS by Fisher & Paykel branded or Fisher & Paykel branded Microwave Accessory Trim Kit (MOTTK). To order the Trim Kit, contact Customer Care. TRIM KIT FRAME ASSEMBLE OVER OVEN INSTALLATION MICROWAVE CUTOUT TOP OF MICROWAVE SHELF 1" (25MM) 40 1/4" (1022MM) WALL OVEN CUTOUT OVER WARMING DRAWER INSTALLATION OVEN FRONT Models above which the MO24-SS microwave oven can be built in: Ovens: WOSU-30 (DCS by Fisher & Paykel) OB30SDEPX (Fisher & Paykel) Warming drawers: WDU-30 (DCS by Fisher & Paykel) WDUI-30 (DCS by Fisher & Paykel) OD30WDX1 (Fisher & Paykel) Do not build in above any other gas or electric wall oven. MICROWAVE CUTOUT RECOMMENDED HEIGHT 36" (914MM) 2" (51MM) WARMING DRAWER CUTOUT See Trim Kit Installation Instructions for proper location when building in above the specified wall ovens. Carefully follow both the wall oven installation instructions and Trim Kit instructions. The opening in the wall or cabinet must be within the following dimensions: A HEIGHT B WIDTH C DEPTH : 17" + 1/16", -0 : 24 3/4" + 1/16", -0 : minimum 20" 4