Fisher and Paykel OR36SDBGX2 OR36SDGBX Installation (English, French) - Page 24
electrical connection
View all Fisher and Paykel OR36SDBGX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
33 electrical connection WARNING Electrical Shock Hazard Plug into a grounded 3-prong outlet. Do not remove ground prong. Do not use an adapter. Failure to follow these instructions can result in death, fire, or electrical shock. Fig. 3.1 If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate. Check with a qualified electrician if you are not sure whether the range is properly grounded. Do Not ground to a gas pipe. A 120-volt, 60-Hz, AC-only, 15-ampere, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided. The outlet must be checked by a qualified electrician to see if it is wired with correct polarity. This appliance, when installed, must be electrically grounded in accordance with local codes. Recommended ground method For your personal safety, this range must be grounded. This range is equipped with a 3-prong ground plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-prong ground-type outlet, grounded in accordance with the National Electrical Code ANSI/NFPA 70 latest edition and local codes and ordinances. If a mating outlet is not available, it is the personal responsibility and obligation of the customer to have a properly polarized and grounded, 3-prong outlet installed by a qualified electrician. WARNING VERY IMPORTANT Before any operation of maintenance disconnect the appliance from the electrical mains supply. 3-prong ground plug power supply cord ground prong 3-prong polarized ground-type outlet Fig. 3.2 24