Fisher and Paykel OR36SDBGX2 OR36SDGBX User Guide (English, French) - Page 14

❃3 OFF Fig. 3.1 OVEN BURNER It carries out normal "oven cooking". The gas flow to the burner is regulated by a thermostat which allow to maintain the oven temperature constant. The control of the temperature is assured by a thermostatic probe positioned inside the oven. The probe must be always kept in its housing, in a clean condition, as an incorrect position or encrustment may cause an alteration in the control of the temperature. OVEN THERMOSTAT The numbers printed on the control knob (fig. 3.1) indicate the increasing oven temperature value (see temperature table near the control knob - fig. 3.1). Left column of the temperature table refers to oven burner used in combination with the fan motor while right column refers to oven burner used in the normal convection mode (without fan motor). To regulate the temperature, set the chosen number onto the control panel indicator. The position BROIL serves only to turn on the broil burner. OVEN LIGHT AND FAN MOTOR The oven light and the fan motor are controlled by a switch knob on the control panel 525 (fig. 3.2). To light up the oven lamp turn the knob anti-clockwise to LIGHT position. 575 To operate the fan motor turn the knob clockwise to LIGHT & FAN position. In this setting also the oven lamp is lighted. WARNING: The switch knob can be turned only clockwise from OFF to LIGHT & FAN position and anti-clockwise from OFF to LIGHT position. The switch knob DO NOT TURN from LIGHT & FAN to LIGHT position. DO NOT FORCE. IMPORTANT NOTE: The fan motor can be used in combination only with the oven burner. A safety device switches off the fan motor when the gas oven/broil control knob is turned on BROIL position. OFF OK OK Fig. 3.2 NOT TURN 14