Fisher and Paykel OR36SDBMX1 Installation Manual - Page 18
Conversion To Lp/propane Gas Or Conversion, Back To The Original Gas - Natural Gas, Setting
View all Fisher and Paykel OR36SDBMX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
2 CONVERSION TO LP/PROPANE GAS (OR CONVERSION BACK TO THE ORIGINAL GAS - NATURAL GAS) Every range is provided with a set of orifices for the various types of gas. Select the orifices to be replaced according to the "ORIFICES TABLE". The nozzle diameters, expressed in hundredths of a millimetre, are marked on the body of each orifice. CAUTION: Save the orifices removed from the appliance for future use. SETTING THE PRESSURE REGULATOR The pressure regulator is accessible by removing the storage drawer; the pressure regulator is positioned on the rear right side of the range (fig. 2.9). To remove the storage drawer: 1. Open the drawer completely (fig. 2.8). 2. Move down the lever of left guide (fig. 2.8a) and up the lever of right guide (fig. 2.8b). 3. Remove the drawer holding the levers in the same position (fig. 2.8). WARNING: • Do not remove drawer while hot. • Do not remove drawer while the appliance is in operation. • Be sure drawer is empty before removing. • Always position your hand below the front panel to open/close the drawer. Fig. 2.8a 18 Fig. 2.8b Fig. 2.8