Fisher and Paykel RF170ADUX1 ActiveSmart™ Ice & Water User Guide - Page 12
Active Smart™
View all Fisher and Paykel RF170ADUX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
10 Installation instructions 11 Attach double sided foam to the back of the water filter head as shown in Diagram 5. Write the date to be replaced on the filter (date installed + 6 months). Remove double sided foam backing and attach filter to the desired position as located in step 10 (refer to previous page). 12 Run the 6 mm (¼") tubing to the back of the refrigerator ensuring there is enough tubing to pull out the refrigerator for service. 13 Connect tubing into the water (solenoid) valve located on the right hand side of the unit (compressor) compartment as shown in Diagram 7. Beware of hot pipes. 14 Pull gently on tubing to ensure it is locked in as shown in Diagram 8. 15 The completed installation should look like Diagram 9 on page 11. Diagram 5 Fig.7 Double sided foam attachment Diagram 7 Diagram 8 Fig.8 Waterline connection to refrigerator Diagram 6 16 Turn isolating tap on and check that all connections are dry and free of drips. 17 Coil water line tubing behind the refrigerator. Push your refrigerator into place being careful not to kink or squash the water line running into the water (solenoid) valve. 18 Read pages 12 - 15 carefully, and then turn refrigerator on. 19 The first time you require water out of the dispenser, there will be a delay while the water reservoir fills up. 20 Run a further 3 litres (3 qt) through the system, stopping intermittently to ensure the reservoir is flushed out. Failure to do this will result in excessive dripping from your dispenser. 21 On your display press the button until the Ice menu is highlighted. Then press to turn on the ice maker. Press and hold together to force a cycle. The ice tray will flip. Force another cycle. The ice tray will flip and spill water into the ice bin. Empty water and replace bin. 22 You are now ready to enjoy automatic ice dispensing and chilled water from your Active Smart™ refrigerator. Please note that once installation is complete, a few drips may appear out of the dispenser over the next few days as the remaining trapped air is cleared.