Fisher and Paykel RF175WDRX1 Active Smart RF175 & RF195 User Guide & I - Page 13
Leveling the refrigerator door RF195A only, What to do if the product is unstable all models
View all Fisher and Paykel RF175WDRX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installation instructions 11 EN 6. Leveling the refrigerator door (RF195A only) 6 If doors are uneven, do the following: a Determine which door needs to be raised. b Turn the front roller adjustment screw ( a, Fig.3 ) on that side clockwise to raise front corner of door. c If one adjustment screw has reached the limit of its adjustment range and the doors are still not level, lower the opposite door by turning the roller adjustment screw counterclockwise. d Check with level to verify 10 mm) tilt to the back for proper door closure. e Once refrigerator is aligned, screw feet firmly in place and attach toe grille (refer to step 5d). Fig.5 Uneven door alignment 7. What to do if the product is unstable (all models) 7 Gently pull the refrigerator forward and screw down the feet until they make contact with the floor. 8 Push the refrigerator back until the rear rollers contact the floor. a Measure the gap under the front foot, which has come off the floor. b Obtain some solid packing material (hardwood, plastic, etc), which fits firmly into the gap under the foot. Example only Note: do not use metallic materials that may corrode, stain and/or damage floor coverings. Un-level floor This foot lifts off the floor when top front is gently pushed back Fig.6 Unstable refrigerator