Fisher and Paykel RF175WDRX1 Active Smart RF175 & RF195 User Guide & I - Page 14

action are satisfactory.

Get Fisher and Paykel RF175WDRX1 PDF manuals and user guides View all Fisher and Paykel RF175WDRX1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

EN 12 Installation instructions 9 Wind both front feet up and roll the product out of Packing material goes under rear roller position. diagonally opposite front foot that lifts a Place the packing material in the location diagonally opposite the front roller that lifts off the floor. b Make sure the packaging material stays in place Wall behind refrigerator when the product is pushed back into position. c Ideally, the packing material is large enough to rest against the back wall so as to prevent it moving when the cabinet is pushed into position. 10 Roll the refrigerator back into position and adjust front rollers as per step 5 (check alignment and door closing action are satisfactory). a Make small adjustments to front rollers where necessary. b Firmly screw front feet down on the ground. c Check that the product is stable (all 4 feet are on the floor). If not, return to step 7 and repeat 8, 9 and 10. d Place toe grille on the bottom of the refrigerator (refer to step 5d). This foot lifts off the floor when pushing gently on the top front of the refrigerator Fig.7 Stabilizing your refrigerator

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
EN
12
Installation instructions
9
Wind both front feet up and roll the product out of
position.
a
Place the packing material in the location
diagonally opposite the front roller that lifts off
the floor.
b
Make sure the packaging material stays in place
when the product is pushed back into position.
c
Ideally, the packing material is large enough to rest
against the back wall so as to prevent it moving
when the cabinet is pushed into position.
10
Roll the refrigerator back into position and adjust front
rollers as per step 5 (check alignment and door closing
action are satisfactory).
a
Make small adjustments to front rollers where
necessary.
b
Firmly screw front feet down on the ground.
c
Check that the product is stable (all 4 feet are on
the floor). If not, return to step 7 and repeat
8, 9 and 10.
d
Place toe grille on the bottom of the refrigerator
(refer to step 5d).
Wall behind
refrigerator
This foot lifts off the floor when pushing
gently on the top front of the refrigerator
Packing material goes under rear roller
diagonally opposite front foot that lifts
Fig.7 Stabilizing your refrigerator