Fluke 1625-2 User Manual - Page 21
Setup, Batteries
View all Fluke 1625-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Function Earth/Ground Tester Setup Table 5. Display Descriptions (cont.) Displays Condition Hardware malfunction (for example, current overload). edw049.eps EE PROM memory access malfunction. Note Switch ON/OFF if still faulty. The symbol may appear when using the stakeless measurement on low resistance circuits. Contact service. edw050.eps Internal computation malfunction. edw051.eps Thermal overload. Cool thoroughly. flashes on display edw052.eps Setup Batteries Note Rechargeable batteries may be used but must be charged outside of the instrument. The number of measurements available with these cells will typically be different to those available using alkaline cells. This Tester is equipped with six 1.5 V batteries IEC LR6 type AA. Replace or recharge the batteries if the battery indicator shows 1 or 0 bars. To insert the batteries: 1. Switch off instrument, see Figure 2. 2. Disconnect all test leads. 3. Open battery compartment. 4. Insert batteries. Always replace the complete set of batteries. 5. Close battery compartment. 13