Fluke 435-II Manual - Page 166
Installing the USB Drivers, Connect the Fluke 430 Series II - 435 series ii software
View all Fluke 435-II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Fluke 434-II/435-II/437-II Users Manual Installing the USB Drivers To install the USB drivers, do the following: 1 Connect the Fluke 430 Series II instrument to the PC, using the USBcable supplied with the instrument. The cable may be plugged in and out even when both the computer and the instrument are switched on ('hot-swap'), it is not required to power either one down. When the appropriate drivers for the Fluke 430 series II instrument have not yet been installed, Windows will show that New Hardware is detected and the Wizard for the installation of new drivers will open. Depending on your PC settings and operating system, Windows may ask for permission to search the Windows Update Web site on the internet for the latest revision. If you have internet access at such moment, it is recommended to select "Yes", then "Next", so as to get the latest revision of the drivers. In case no internet access is available, install the drivers from the CD-ROM or from a location on the hard drive. For that, select "No, not this time". 2 In the following window, click "Next" to install the software automatically. In case drivers should be loaded from CDROM, select 'select from a list or specific location' instead. B-2 MyFlukeStore Shop for Fluke products online at: www. .com 1.877.766.5412