Fluke 51 FE 51 & 52 II Users Manual - Page 13

Using the Thermometer 1. Plug the thermocouple(s) into the input connector(s). 2. Press A to turn on the thermometer. After 1 second the thermometer displays the first reading. If no thermocouple is plugged into the selected input or the thermocouple is "open," the display shows "- - - -" Changing Setup Options Use Setup to change the thermocouple type, offset, sleep mode, and line frequency settings. The thermometer stores the settings in its memory. Setup settings reset only when the batteries are removed for more than 2 minutes. 51 & 52 Series II Using the Thermometer Entering or Exiting Setup When the thermometer is in Setup mode, the display shows s. • Press D to start or exit Setup. Setup Options Option Menu Item Settings Thermocouple Type TYPE J, K, T, or E Offset O T1 or T2 (Model 52) Sleep Mode SLP on (sleep mode on) or 0FF (sleep mode off) Line Frequency Li ne 50 H (50 Hz) or 60 H (60 Hz) 9