Fluke 700G07 Product Manual - Page 18

700G Series Users Manual each parameter. To move to the next parameter, push . You can access, lock, or unlock these functions: • Zero function (enable/disable) • Set pressure units (enable/disable) • Auto shutdown adjustment (enable/disable) • Damping settings (enable/disable) • Sample rate setting (enable/disable) • Tare setting (enable/disable) • Custom engineering units (set scale factor) When a function is locked, it cannot be accessed or changed from its current condition until you go to Supervisory Mode and unlock it. Available Pressure Ranges Available pressure ranges are listed in the Specifications section. How to Set a Custom Engineering Unit or Scale The last menu selection in Supervisory mode is SET FACTR. You can set a multiplier factor from 0.001 to 100 to make a custom scale. The set factor is multiplied by the psi measured and the result is shown. Example: 40 psi is the equivalent of 1000 lbs of product in a tank. You want to show the product weight with a 100 psi gauge. If you set a factor of 25, 40 psi pressure would show as 1000 (40 x 25). The engineering unit shown is Cust (custom). Battery Life Battery life is approximately 1500 hours (60 days) of continuous operation with the backlight off. With intermittent operation, batteries could last a year or more. When the battery voltage is low, the low-battery icon () shows on the top left of the display. To replace the batteries, see the How to Change the Batteries section. 10 MyFlukeStore Shop for Fluke products online at: www. .com 1.888.610.7664