Fluke 718-300G Fluke 717 and 718 Pressure Calibrator Datasheet - Page 1
Fluke 718-300G Manual
View all Fluke 718-300G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Fluke Pressure Calibrators Technical Data Fluke 718 Pressure Calibrator The complete solution to pressure calibration The Fluke 718 pressure calibrator family (4 models) provide a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique, easy to clean out access ports built into the pump protect the pump from fluids and provides the ability to service the pump without disassembly. • Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device • Integrated pump is easily cleaned when accidentally exposed to fluids: - reduces cost of ownership and repairs - service the pump in the field • Error % calculation for quicker pass/fail decision making in the field • Best in class mA accuracy of 0.015 % for better measurement confidence and workload coverage • Min/Max/Hold to capture changing measurements • Switch test feature for quicker and more accurate pressure switch testing • New 1 and 300 PSI pressure ranges mean fewer extra tools required • 1, 30, 100 & 300 PSI ranges now available General Specifications Maximum voltage: 30 volts: Non-operating Temperature: -40 °C to 60 °C Operating temperature: -10 °C to 55° C Relative humidity: 95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C); 45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C) Operating altitude: 3,000 m max Shock: 1 m drop test Vibration: Random, 2 g, 5 Hz - 500 Hz Safety: CSA C22.2 No. 1010.1: 1992 EMC: EN50082-1: 1992 and EN55022: 1994 Class B Size/weight (717 with holster): 201 mm x 98 mm x 52 mm (7.93 in x 3.86 in x 2.06 in) 600 g (21 oz) Size/weight (718 with holster): 216 mm x 94 mm x 66 mm (8.50 in x 3.72 in x 2.60 in) 992 g (35 oz) Power: 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718 Battery Life: 4 to 20 hours typical, depending on functions used Warranty: Three years (one year on pressure pump in Fluke 718) Display: LCD, 5 digit pressure and current simultaneous Accuracy: 0.05 % Note: For use with non-corrosive gasses