Fluke 9040 User Manual - Page 13
Replacing the Fuse (9040UK only - how to use a
View all Fluke 9040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Phase Rotation Indicator Replacing the Fuse (9040UK only) Replacing the Fuse (9040UK only) XW Warning For safe operation and maintenance of the product: • Use only specified replacement fuses. See Specifications section. • Before you replace the fuse, disconnect the accessory (cable or probe) at both ends. To replace the fuse: 1. Check the fuse using a simple continuity test. 2. Hold the probe in front of the finger guard and unscrew the tip in a counter- clockwise direction. 3. Remove the defective fuse from the fuse holder. 4. Insert a new fuse in the fuse holder and reassemble the probe. 9
Phase Rotation Indicator
Replacing the Fuse (9040UK only)
9
Replacing the Fuse (9040UK only)
XW
Warning
For safe operation and maintenance of the product:
•
Use only specified replacement fuses. See Specifications section.
•
Before you replace the fuse, disconnect the accessory (cable or probe)
at both ends.
To replace the fuse:
1. Check the fuse using a simple continuity test.
2. Hold the probe in front of the finger guard and unscrew the tip in a counter-
clockwise direction.
3. Remove the defective fuse from the fuse holder.
4. Insert a new fuse in the fuse holder and reassemble the probe.