Fluke 971 FE 971 Users Manual - Page 6

971 Users Manual Min Max Record When enabled, Min Max Record stores a new measurement when it is either higher or lower than a previously stored maximum or minimum measurement. Press N to start Min Max Record. M appears in the display to indicate Min Max Record mode is enabled. Note The temperature scale switch (°C/°F), Save, Recall, and Hold buttons, as well as the Automatic Power Off (APO) switch are all disabled when Min Max Record is enabled. To view the stored Minimum, Maximum and Average readings, press N repeatedly to cycle through all three stored sets of measurements. You must select wet bulb, dew point, or ambient before reading their respective Min Max Avg values. The display indicates which stored set of readings is displayed. Pressing N a fourth time displays the present measurement. To exit Min Max Record mode and resume normal operation, press and hold N for two seconds. Saving and Recalling Measurements The Meter stores up to 99 readings for later recall. Each memory location stores relative humidity as well as ambient, dew point and wet bulb temperatures. 4