Fluke BT510 Product Manual - Page 39
Measure DC Voltage, Set Measurement Range, Save DC Voltage Readings
View all Fluke BT510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
BT510 Users Manual Measure DC Voltage The Product can measure dc voltage. It also shows the polarity on the display. To measure dc voltage, turn the rotary switch to . See Figure 3-3 for connections. Save UPS Vdc Figure 3-3. Measure DC Voltage hpo019.eps Set Measurement Range In this measurement mode, auto range is used by default. When the input signal reaches 110 % of the upper limit of the current range, the Product automatically increases a range. When the input signal reaches 90 % of the lower limit of the current range, the Product automatically decreases a range. To manually set the range, push to cycle through 6 V, 60 V, and 600 V. Save DC Voltage Readings In Meter mode, push the Save softkey to save the current dc voltage reading and the timestamp. All saved data is stored in chorological order. In Sequence mode, push the Save softkey to save the current dc voltage reading and the timestamp. The current battery number automatically increases by 1. The cell that corresponds to the tested point becomes full, and the cursors move forward. 3-14 MyFlukeStore Shop for Fluke products online at: www. .com 1.888.610.7664