Home » Fluke Manuals » Electronics Accessories » Fluke BT521 » Manual Viewer

Fluke BT521 Product Manual - Page 32

Load a Profile When Switched to Sequence Mode, Load a Profile During Measurement in Sequence Mode

Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

BT521 Users Manual Load a Profile When Switched to Sequence Mode To load a profile when switched to Sequence mode: 1. On the Enter SEQUENCE mode? screen, push the Load softkey. The Load profile screen shows the list of history profiles in the Product memory. 2. Use  and L to highlight the number of the profile to be loaded. 3. Push the Load softkey. Configurations of the selected profile show on the display. 4. Push the Continue softkey to confirm loading the selected profile. Name of the loaded profile shows on the upper-left corner of the display. Load a Profile During Measurement in Sequence Mode To load a profile during measurements in Sequence mode: 1. On the measurement screen, push the Profile softkey. The Profile info screen shows. 2. Push the Load softkey. The Load profile screen shows. 3. Use the Prev and Next softkeys and L to select a profile. 4. Push the Load softkey. 5. Push the Continue softkey to load the selected profile. 3-6 MyFlukeStore Shop for Fluke products online at: www. .com 1.888.610.7664

Section	Page
BT521 Users Manual	1
Warranty	2
Table of Contents	3
List of Tables	6
List of Figures	7
1. Product Overview and Specifications	8
Introduction	8
Contact Fluke	8
Product Overview	8
Standard Equipment	10
Safety Information	12
Radio Frequency Data	15
Keys and I/O Terminals	15
LCD Display	17
Specifications	18
General Specifications	18
Accuracy Specifications	19
Records Capacity	20
2. Setup	21
Introduction	21
Tilt Stand	21
Belt Strap	22
Adjust Display Contrast	23
Set Language	23
Set Date and Time	23
Turn On/Off Beep	24
AutoHold and AutoSave Modes	24
Set Auto Power Off Time	25
View Device Information	26
Reset to Factory Mode	26
View Memory Usage Information	26
3. Use the Product	27
Introduction	27
Switch Between Meter Mode and Sequence Mode	27
Use a Profile in Sequence Mode	29
Manage Profiles	29
Create a Profile	30
Edit a Profile	31
Edit a Profile During Creation	31
Modify a Profile During Measurement	31
Load a Profile	31
Load a Profile When Switched to Sequence Mode	32
Load a Profile During Measurement in Sequence Mode	32
Make Measurements	33
Test Battery Internal Resistance and Voltage	33
Battery Test Probes	34
View Test Readings on the Screen	35
Measure Strap resistance in sequence mode	36
Save Battery Test Readings	36
Erase Test Readings	36
Activate Low-Pass Filter for Resistance Measurement	36
Set Measurement Thresholds	36
How the Thresholds Work	38
Measure Discharge Voltage	38
Make Measurements	38
Typical Display	39
Measure DC Voltage	40
Set Measurement Range	40
Save DC Voltage Readings	40
Measure AC Voltage	41
Measurement Range	41
Save AC Voltage Readings	41
Measure Ripple Voltage	42
Set Measurement Range	42
Save Ripple Voltage Readings	42
Measure Current (AUX Function)	43
Set Measurement Range	43
Save Current Measurement Readings	43
Use the i410 Current Clamp	43
Measure Voltage with TL175	44
4. Use the BTL21 Interactive Test Probe	45
Introduction	45
BTL21 Overview	45
Connect the Probe to the Product	46
Configure the Interactive Test Probe on the Product	46
Set the Audio	46
Set Temperature Unit	46
Set Emissivity Value	47
Turn On/Off Power	49
Understand the Display	49
Long and Short Extenders	50
Replace the Probe Tips	51
Zero Calibration	52
Measure Temperature	53
5. View Memory	54
Introduction	54
View Data Saved in Meter Mode	54
Delete Data Saved in Meter Mode	55
View Profiles Saved in Sequence Mode	56
Delete Profiles Saved in Sequence Mode	56
6. Connection to PC or Mobile Device	58
Introduction	58
Connect the Product to PC	58
Connect the Product to a Mobile Device	59
7. Maintenance	60
Introduction	60
Install or Replace the Battery Pack	62
Replace the Fuse	63
Clean the Product	64
Charge the Battery	64