Fluke TiR105 User Manual - Page 44
CNX™ Wireless System, Camera - meters
View all Fluke TiR105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Ti100, Ti105, Ti110, Ti125, TiR105, TiR110, TiR125 Users Manual CNX™ Wireless System The Imager supports the Fluke CNX™ Wireless System (may not be available in all regions). It can discover up to 10 3000 Series wireless tools up to 20 meters away. From those 10, you can select 5 tools to view their live measurements on the Imager display. To discover a supported tool: 1. If not already on, turn on each wireless tool and make sure the wireless feature is enabled. See the documentation of each tool for more information about how to use. 2. Turn on the Imager. 3. Push . 4. Push / to highlight Camera. 5. Push or to view the menu. 6. Push / to highlight CNX. 7. Push or to view the menu. 8. Push / to highlight ON. 9. Push or start the discovery process. When done, the Imager presents a list with the ID and name of available tools found within the 20 m distance. 10. Push / to highlight a tool name. 11. Push to select the tool. 12. Repeat steps 10 and 11 for each tool to show on the display. 13. Push when done. The labels change to include an Edit function. By default, the Imager shows and saves the data for the selected tools. If these settings are acceptable, push to exit the CNX setup menu. To edit the selection: 14. Push / to highlight the tool name. 15. Push or to view the Edit menu. The Edit menu gives you a choice to display the measurement data and/or save it to the SD memory card. 16. Push to accept the change. 17. Push when done to exit the menu. The display updates to show the wireless icon and live measurement for each selected wireless tool. 38