Foscam FI8907W User Manual

Foscam FI8907W Manual

Get Foscam FI8907W PDF manuals and user guides View all Foscam FI8907W manuals
Add to My Manuals
Save this manual to your list of manuals

Foscam FI8907W manual content summary:

  • Foscam FI8907W | User Manual - Page 1
    User Manual Model: FI8907W Indoor Wireless IP Camera Color: Black Color: White
  • Foscam FI8907W | User Manual - Page 2
    2 Surveillance Software GUI...4 2.1 Login Window...5 2.2 Surveillance Window...6 3 Advanced Camera Settings...11 3.1 Device Status...11 3.2 Alias Settings...12 3.3 Date & Time Settings...13 3.4 User Settings...13 3.5 Multi-Device Settings...14 3.6 Basic Network Settings...21 3.7 Wireless Settings
  • Foscam FI8907W | User Manual - Page 3
    www.fosca m.com 4.1 Frequently Asked Questions...49 4.2 Default Parameters...53 4.3 Specifications...54 5 OBTAINING TECHNICAL SUPPORT 55 Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 2 2
  • Foscam FI8907W | User Manual - Page 4
    www.fosca m.com 1 Overviews FOSCAM FI8907W is an integrated wireless IP Camera with a color CMOS sensor. It combines a high quality digital video camera, with a powerful web server, to bring clear video to your desktop from anywhere on your local network or over the Internet. The basic function of
  • Foscam FI8907W | User Manual - Page 5
    that all contents received are complete according to the Package Contents listed below. Before the Network Camera is installed, please carefully read and follow the instructions in the Quick Installation Guide to avoid damage due to faulty assembly and installation. This also ensures the product is
  • Foscam FI8907W | User Manual - Page 6
    the IP camera will be reset back to factory default settings. You must power on the camera before reset. 2) Press and hold down the RESET BUTTON about 4 seconds, then press the WPS button on the router, then you can use the WPS function. (For more details: please read Wireless Settings in the User
  • Foscam FI8907W | User Manual - Page 7
    . Cloned Foscam cameras can not use original firmware and are not eligible for warranty or technical services. FOSCAM domain name MAC address of wireless connection MAC address of wired connection S/N of FOSCAM Figure 1.3 2 Surveillance Software GUI Please refer to the Quick Installation Guide if
  • Foscam FI8907W | User Manual - Page 8
    1 2 www.fosca m.com 3 4 5 6 Figure 2.1 Please check the login window above, it was divided to 6 sections from no. 1 to 6. Section1 Select Language FOSCAM camera supports up to multi-languages, such as English, Spanish, Deutsch and so on. You can select the language you need via pull down the
  • Foscam FI8907W | User Manual - Page 9
    Figure 2.2 6 Section1 Device Name Default device name is Anonymous. You can define a name for your camera as you like (Please go to chapter 3.1 and read how to set it) Section2 Multi-Device Window Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 6 6
  • Foscam FI8907W | User Manual - Page 10
    www.fosca m.com The firmware inside the camera supports up to maximum of 9 cameras being monitoring at the same time. You can add other cameras in multi-device setting (read chapter 3.5). Figure 2.3 Section3 Image Parameters Settings OSD OSD is used to add timestamp on the video. There are five
  • Foscam FI8907W | User Manual - Page 11
    image quality is, but the lower the frame rate is. If you are accessing the camera via internet and want to get more fluent video streaming, please select resolution QVGA 320x240. , Click it again Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 8 8
  • Foscam FI8907W | User Manual - Page 12
    3 4 1------Play Click it to play the video of the camera 2------Stop Click it to stop the video of the camera 3------ Talk Button Click the talk icon , and the icon can see the following screen: Figure 2.4 Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
  • Foscam FI8907W | User Manual - Page 13
    plug-in, Click Audio, and you can see the download website. Figure 2.5 During the installation, you must select Mozilla plugin as in Figure 2.6. Figure 2.6 Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 10 10
  • Foscam FI8907W | User Manual - Page 14
    MSN Setting Another Way: Double click the the icon "IP Camera.exe" , select the camera IP, right click and select the Basic Properties, you can also see the Firmware Version and MAC Address, such as the following screen: Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668
  • Foscam FI8907W | User Manual - Page 15
    3.2 Figure 3.3 3.2 Alias Settings Default alias is Anonymous. You can define a name for your camera here such as apple. Click Submit to save your changes. The alias name supports special characters. Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 12
  • Foscam FI8907W | User Manual - Page 16
    Select the time zone belong to your region Figure 3.5 3.4 User Settings Here you can create users and set permission levels, visitor, operator or administrator. Click Submit to save these settings. The camera will reboot. Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668
  • Foscam FI8907W | User Manual - Page 17
    XP/2000.For "set record path" function, user should add the Device IP address to the Internet Explorer's 'Trusted sites' to the cameras if there is 8 cams installed. The firmware within the camera can support a maximum of 9 devices monitoring all at the same time. Shenzhen Foscam Intelligent
  • Foscam FI8907W | User Manual - Page 18
    one. You can add more cameras in the list in LAN for monitoring. The camera's software supports up to 9 IP Cameras online simultaneously. Click The automatically 2 Enter the User name and password of the 2nd camera 3 Click Add to take effect Figure 3.7a Shenzhen Foscam Intelligent Technology Co.,
  • Foscam FI8907W | User Manual - Page 19
    www.fosca m.com Click Submit after add all cameras Figure 3.7b Back to Surveillance Windows, and click Four Windows option, you will see four cameras you added. Figure 3.8 Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 16 16
  • Foscam FI8907W | User Manual - Page 20
    using DDNS domain name. Firstly, make sure all of the cameras you added can be accessed through the internet. (Read How to configure DDNS settings in chapter 3.10) Login to the first camera using a DDNS domain name and port. Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668
  • Foscam FI8907W | User Manual - Page 21
    The 2nd Device. Fill in the 2nd camera's name, DDNS domain name, port number. Enter user name and password and then choose Add. (Figure 3.11) NOTE: Here the Host must be entered as the second camera's DDNS domain name, not its LAN IP. Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755
  • Foscam FI8907W | User Manual - Page 22
    3.11 1----- The 2nd camera's name 2----- Fill in the 2nd camera's DDNS host not LAN IP 3 ---- Enter the 2nd camera's user name and password 4---- Click Add button and to take effect Add the other cameras in the same way. Click Submit to save. Shenzhen Foscam Intelligent Technology Co., Limited
  • Foscam FI8907W | User Manual - Page 23
    Return to video window. You will see all of the cameras accessible through the internet. When you are away from home, you can use the first camera's DDNS domain name and port to view all the cameras via internet. Figure 3.13 Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668
  • Foscam FI8907W | User Manual - Page 24
    . Figure 3.14 Changing settings here is the same as using the IP Camera Tool. (Figure 3.17/3.18) It is recommended that you use Control Panel  Network Connections  Local Area Connections  Choose SupportDetails. Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax:
  • Foscam FI8907W | User Manual - Page 25
    same settings as the Default Gateway. Network lamp: There is a network lamp on the back of the camera, select it and when the network connection are working, the lamp will turn on and blink. Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 22 22
  • Foscam FI8907W | User Manual - Page 26
    camera's LAN IP and HTTP Port no. Open the IP Camera Tool, select the camera you want to change the port no, right click on the IP with PC's IP address. The gateway is your router's LAN IP. DNS Server: IP address of computer. Your PC contains your PC's IP address, gateway and DNS server. Normally,
  • Foscam FI8907W | User Manual - Page 27
    administrator user name is admin with no password. NOTE: If the prompt "Subnet doesn't match, dbclick to change!" appears, please enable DHCP set camera's IP address and gateway once again. 3.7 Wireless Settings Wireless Lan Settings support three modes: Infra(Do wireless lan settings manually) and
  • Foscam FI8907W | User Manual - Page 28
    process, wait 10 seconds and disconnect the network cable. The LAN IP address will disappear on the window of IP Camera Tool when the camera gets restarted. Just wait for around 1 minute, the camera will get wireless connection, and the LAN IP of the camera will be showed again on the window of the
  • Foscam FI8907W | User Manual - Page 29
    your router's User Manual. The camera will automatically create a secure wireless connection to your router. If you have plugged in the network cable, please plug it out. While connecting, the green network light will blink quickly and the wireless settings will take effect. The IP Camera Tool will
  • Foscam FI8907W | User Manual - Page 30
    the PC. Select the SSID you filled at Figure3.21 for your camera and enter the same key with your camera. Make sure PC and Camera share the same subnet. Open the IP Camera Tool, you can search the camera LAN IP again. Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86
  • Foscam FI8907W | User Manual - Page 31
    to a ADSL modem, you can do ADSL settings with your ADSL account &password provided by the ISP, then make the camera connected to the network. Enter the ADSL user and password Figure 3.24 Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 28 28
  • Foscam FI8907W | User Manual - Page 32
    is closed. You can select the checkbox and open UPnP, then the camera's software will be configured for port forwarding. Back to the "Device Status" recommend you configure port forwarding manually on your router (Figure 3.30). 3.10 DDNS Service Settings FOSCAM camera has embedded a unique DDNS
  • Foscam FI8907W | User Manual - Page 33
    Name Settings User can also use third part DDNS, such as www.no-ip.com. ,www. dyndns.com Here take www.no-ip.com for example: ① Step 1, Go to the website www.no-ip.com to create a free hostname Firstly: Login on www.no-ip.com and click No-IP Free to register. Shenzhen Foscam Intelligent Technology
  • Foscam FI8907W | User Manual - Page 34
    register Figure 3.27 Please register an account step by step according to instructions on www.no-ip.com After registration, please login your email which used to register. your domain name. Figure 3.28 Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
  • Foscam FI8907W | User Manual - Page 35
    step by step according to instructions on www.no-ip.com Step 2, DO DDNS Service Settings within the Camera Please set DDNS Service Settings within the camera by hostname, a user name and password you've got from www.no-ip.com Take hostname ycxgwp.no-ip.info, user name foscam, password foscam2012 for
  • Foscam FI8907W | User Manual - Page 36
    , the accessing link of the camera via internet would be http:// ycxgwp.no-ip.info:88 3.11 Mail Service Settings If you want the camera to send emails when motion/sound has been detected, Mail Service Settings will need to be configured. Shenzhen Foscam Intelligent Technology Co., Limited Tel
  • Foscam FI8907W | User Manual - Page 37
    Sender Mailbox for sender must support SMTP 2----- Receiver Mailbox for receiver need not support SMTP,you can set 4 receivers which Transport Layer Security you select. 4---- SMTP user ID account of the sender email address 5----Submit Click Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755
  • Foscam FI8907W | User Manual - Page 38
    correctly. 3.12 MSN Setting If you want the camera send its current internet IP address to you or your friends, please set MSN settings. Acquire an MSN ID for the IPCAM first, then follow the instructions as per Figure 3.33. Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674
  • Foscam FI8907W | User Manual - Page 39
    com Fill in the user and password of the MSN ID you applied for your camera 。 MSN ID in this list can chat with the camera . Figure 3.33 double click the camera's account (foscam31), then enter "url?", the camera will send it's current IP address to you. Shenzhen Foscam Intelligent Technology Co.,
  • Foscam FI8907W | User Manual - Page 40
    the MSN account, this account cannot be used for anything else when the camera works. 3.13 FTP Service Settings If you want to upload images to your FTP server，you can set FTP Service Settings. Figure 3.36 Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674
  • Foscam FI8907W | User Manual - Page 41
    to store images exists as the camera can't create the folder itself. Also, the folder must be read/writable. FTP Mode: The camera supports standard (POST) mode and passive image being uploaded. Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 38
  • Foscam FI8907W | User Manual - Page 42
    try later. 3) Server Error. 4) Incorrect user or password. Check the username and password. Service Settings IP Camera supports Motion Detection Alarmed and Sound Detection Alarmed, when the motion or sound has been detected, it will send email alerts or upload images or record. Shenzhen Foscam
  • Foscam FI8907W | User Manual - Page 43
    enable Motion Detection Armed/Sound Detection Alarmed, the Alarm Status will turn to Motion/Sound Detect Alarm. Figure 3.40 There are four alarm indicators: Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 Here you can see the alarm status . 40 40
  • Foscam FI8907W | User Manual - Page 44
    com 1) Camera will send emails when motion/sound is activated. If you want to receive images when motion is detected, you must set Mail Service Settings first to an FTP server when motion/sound is detected, you must set FTP Service Settings(Figure 3.36/3.37) first and then set motion/sound alarm as
  • Foscam FI8907W | User Manual - Page 45
    . www.fosca m.com Select this option . Figure 3.43 4) The camera will record automatically for one minute after motion/sound is detected. You Select the checkbox Figure 3.44 When you enable motion alarm, the camera will record automatically and store the recording file to the folder you
  • Foscam FI8907W | User Manual - Page 46
    motion/sound is detected. Don't select Scheduler. Click Submit and the camera will alarm at any time when motion is detected. Figure 3.45 Another following picture. Click Submit and the camera will alarm at any time when motion is detected. Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86
  • Foscam FI8907W | User Manual - Page 47
    46 2) Specify an alarm schedule. If you want the camera to alarm during set times select Scheduler and set time range the number "06" on the first row, you can see the column turn blue. That means the camera will alarm when motion/sound is detected between 6 and 7 o'clock every day. Click the number"
  • Foscam FI8907W | User Manual - Page 48
    time range. It will turn blue. If you want to delete it, just click the left button and it will turn grey. Figure 3.48 Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 45 45
  • Foscam FI8907W | User Manual - Page 49
    finds the camera again. Upgrade Firmware by IP Camera Tool Double click the IP Camera Tool shot icon , select the Camera IP that you want to upgrade the firmware. Then select Upgrade Firmware and enter the username and password, choose the firmware file, and upgrade. Figure 3.50 Shenzhen Foscam
  • Foscam FI8907W | User Manual - Page 50
    User name and password . Figure 3.51 CAUTION: If your camera works well with the current firmware, we recommend not upgrading. Please don't upgrade the firmware unnecessarily. Your camera the Device Firmware. 4) Never shut down the power of the camera during upgrade until the IP camera restart and
  • Foscam FI8907W | User Manual - Page 51
    factory settings if selected. Load the parameters bin file . 1 2 Figure 3.53 3.18 Reboot Device Click Reboot Device to reboot the camera. This is similar to unplugging the power to the camera. Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 48 48
  • Foscam FI8907W | User Manual - Page 52
    3.19 Log The log record shows who accessed the camera and when. (Figure 3.54). www.fosca m.com Figure 3.54 3.20 Back This will take of the indicators on the network server, hub and network card. Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 49 49
  • Foscam FI8907W | User Manual - Page 53
    see no video image. There are two ways to resolve this problem: 1) Reinstall "IP Camera Tool" and ActiveX controller（recommended）. 2) Download ActiveX controller and set Enable: Run ActiveX controls and plug-ins Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755
  • Foscam FI8907W | User Manual - Page 54
    . If you cannot see live video, try shutting down the firewall or anti-virus software and try again. 4.1.4 Can't access IP camera on internet Possible reasons why camera is not accessible on the internet: Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674
  • Foscam FI8907W | User Manual - Page 55
    software. It may also be due to the router's security settings. We recommend manually configuring port forwarding the camera can be viewed on the internet. 4.1.7 Couldn't find the shortcut on the desktop after install IP camera Safari. Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755
  • Foscam FI8907W | User Manual - Page 56
    due to the internet speed issues or the camera using Wi-Fi. 4.2 Default Parameters Default network Parameters IP address: obtain dynamically Subnet mask: 255.255.255.0 Gateway: obtain dynamically DHCP: Disabled DDNS: Embedded FOSCAM domain name Username and password Default administrator username
  • Foscam FI8907W | User Manual - Page 57
    Wireless Security Infrared Light Dimension Gross Weight Net Weight Power Supply Power Consumption Operate Temper. Operating Humidity Storage Temper. Storage Humidity CPU Memory Size Display Card Supported OS FI8907W HTTP,FTP,TCP/IP,UDP,SMTP,DHCP, Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax:
  • Foscam FI8907W | User Manual - Page 58
    have questions that this User's Guide has not answered. If you have problem with FOSCAM IP camera, please first contact FOSCAM reseller for solving the problems. If our reseller cannot provide service, pls contact our service department: [email protected] . Shenzhen Foscam Intelligent Technology Co
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
User
User
Manual
Manual
Model: FI8907W
Indoor Wireless IP Camera
Color: Black
Color: White