Foscam FI8907W User Manual - Page 28
WPS Wi-Fi Protected Set-up
View all Foscam FI8907W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
www.fosca m.com Step 02) Click the SSID of your router in the list, the corresponding information (SSID & Encryption) will be filled in the following boxes automatically. You will only need to fill in the share key. Make sure that SSID, Encryption and share key you filled in for the camera are exactly the same for your router. Click the SSID of router and SSID, Encryption will be filled in the following box automatically . Enter the same share key with your router . Figure 3.20 Step 03) Please click on the Submit button after all settings have been entered,the camera will reboot. After the camera has completed the reboot process, wait 10 seconds and disconnect the network cable. The LAN IP address will disappear on the window of IP Camera Tool when the camera gets restarted. Just wait for around 1 minute, the camera will get wireless connection, and the LAN IP of the camera will be showed again on the window of the IP Cam Tool. You have done wireless connection of the camera successfully. If the camera has a dynamic IP, after the wireless settings, the IP will be changed. NOTE: If fail to make WiFi connection, please refer to seller or us for help. 3.7.2 WPS (Wi-Fi Protected Set-up) Step 01) Please use a small round stick or like toothpick to press and hold the RESET button for four seconds. . Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 25 25