Foscam FI8919W USER MANUAL - Page 31
IP Address, Subnet Mask, Gateway
![]() |
View all Foscam FI8919W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
www.foscam.us Another way to change the camera's LAN IP and HTTP Port no. Open the IP Camera Tool, select the camera you want to change the port no, right click on the IP address link, and goes to Option "Network Configuration", it pops up another dialogue showed as the following screen Figure 3.17 Select the camera you want to change the LAN IP or port no, right click. Figure 3.18 IP Address: Fill in the IP address assigned and make sure it is in the same subnet as your computer or router. (I.e. the first three sections are the same) Subnet Mask: The default subnet mask of the equipment in our LAN is: 255.255.255.0.You can find the subnet mask in the basic information of your router or the locally-attached of your PC. Gateway: Make sure it is in the same subnet with PC's IP address. The gateway is your router's LAN IP. Foscam Digital Technologies LLC Telephone: 1-800-930-0949 30 30
![](/manual_guide/products/foscam-fi8919w-user-manual-d3e28f2/31.png)