Foscam FI8919W USER MANUAL - Page 32
Wireless, Settings
View all Foscam FI8919W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
www.foscam.us DNS Server: IP address of your ISP network provider. You can find the DNS server in your router or check the locally-attached address of your computer. Your PC contains your PC's IP address, gateway and DNS server. Normally, there are two DNS servers. Here you can also set the DNS server the same with gateway. Http Port: The default Lan port is 80.You can set another port number, such as port 8005, 8100.etc. User&Password: Default administrator user name is admin with no password. If the prompt "Subnet doesn't match, dbclick to change!" appears, please enable DHCP set camera's IP address and gateway once again. 3.7 Wireless Settings Wireless Lan Settings support three modes: Infra(Do wireless lan settings manually) and WPS (Wi-FI Protected Set-up) and Adhoc.. If your router does not support WPS function,please go to chapter 3.7.1 and make wireless connection settings manually. If your router supports WPS function, please go to chapter 3.7.2 and make wireless connection settings quickly. If there is no wireless router, please go to chapter 3.7.3 and connect the IPCAM directly to a host in a peer_to_peer environment. 3.7.1 Infrastructure Mode Step 01) Please choose "Device Management" and goes to the option Wireless LAN Settings , click "Wireless LAN Settings". Then enable "Using Wireless LAN". Foscam Digital Technologies LLC Telephone: 1-800-930-0949 31 31