Foscam NV1104 Quick Start Guide - Page 4

Step 7 The camera is now successfully set up for live viewing and playback! Step 8 To set up WiFi (optional), navigate to Setup > Network > WiFi, then double-click the line that shows your WiFi network. If necessary, enter your WiFi network's password. The camera may take up to 2 minutes to connect to the WiFi network. Click the Refresh button after the process is complete. Once the camera has successfully connected to your WiFi, you should see the word "Connected" in green display next to your WiFi network's name in the WiFi Network Information table under the WiFi List table. Step 9 Note that the IP address may have changed once connected to WiFi. Be sure to use the IP Config tool to access the camera using it's updated IP address. Step 10 After configuring the camera to connect to WiFi, use the P2P Setup method on page 6 to connect the camera via your smartphone or your tablet. Step 11 For quick and easy remote access on your PC or Mac, please use AmcrestCloud.com (see page 7) or AmcrestView.com (see page 8). To setup advanced remote access via UPnP/DDNS or Port Forwarding, please refer to the user manual which can be accessed at amcrest.com/wificameramanual Step 12 To set up the camera's desktop interface for remote access, please refer to the user manual which can be accessed at amcrest.com/wificameramanual For additional assistance, please contact us at www.amcrest.com or give us a call at 1-888-212-7538. Step-by-step video tutorials available at www.amcrest.com/videos 5 Easily add your camera to devices: P2P setup allows you to add your camera to other smartphones or tablet devices once you have initially set up the camera on the internet. QUICK START GUIDE P2P Setup Note: Use if your camera has already been connected to the internet, either via a wired or WiFi connection. Step 1 Connect the camera to a power supply using the included power adapter. Wait 30 seconds for the camera to start-up and initialize. Step 2 Connect the camera to the internet, either through a wired or WiFi connection (see App Setup or Step 2 of Desktop Access). Step 3 Open the app. Tap the menu icon on the top left and select "Device Manager". Next tap the plus icon on the top right and select the "P2P" option. Step 4 Give the camera a name, then tap on QR code icon in the "S/N" field. Your mobile device is now ready to scan the QR code. In case the QR code cannot be scanned, please enter in the Serial Number (S/N) that is found on the side of the camera. Step 5 Scan the QR code on the side of the camera. Once scanned, the username and password fields will populate automatically. If you have already changed your password, or are logging in as another user, please change the username and password fields accordingly. Step 6 Tap "Next" and wait for the app to connect your phone to the camera. Once connected, tap "Start Live Preview". If logging in for the first time, you will be prompted to create a new password. For additional assistance, please contact us at www.amcrest.com or give us a call at 1-888-212-7538. Step-by-step video tutorials available at www.amcrest.com/videos 6