Foxconn A74GA English Manual. - Page 48

3 PC Health Status CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. PC Health Status Warning Temperature [Disabled] Help Item Shut Down Temperature Case Open Warning [Disabled] [Disabled] Options CPU Temperature :40 oC/104 oF System Temperature :23 oC/73 oF Disabled CPU Fan Speed :3169 RPM 50 oC/122 oF System Fan Speed :N/A 55 oC/131 oF NB Fan Speed :N/A 60 oC/140 oF CPU Core Voltage :1.416 V 65 oC/149 oF DRAM Voltage :1.584 V 70 oC/158 oF 75 oC/167 oF +5.00V :4.919 V 80 oC/176 oF +12.0V :12.126 V 85 oC/185 oF CPU Smart Fan Function [Enabled] 90 oC/194 oF Off PWM Temperature [000] Start PWM Temperature [035] Start PWM Value [064] Slope PWM Value [2 PWM] System Smart Fan Function [Enabled] Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► Warning Temperature This option is used to set the warning temperature for the system. When the temperature of CPU is higher than the set value, the motherboard will warn by beep or speaker. ► Shut Down Temperature This item is used to set the system temperature upper limit. When the temperature exceeds the set value, the system will shut down automatically. This function works only when your operating system is supporting ACPI. ► Case Open Warning This item is used to enable or disable case open warning function. If your chassis support Case Open function, enable this item. It halt and show some warning message on POST after your chassis be opened. ► CPU/System Temperature The CPU/System temperature are automatically detected and displayed by the system. ► CPU Fan/System/NB Fan Speed The CPU fan/System fan speed are automatically detected and displayed by the system. ► CPU Core/DRAM Voltage/ +5.0V/+12.0V The current voltages are automatically detected and displayed by the system. ► CPU Smart Fan Function / System Smart Fan Function/NB Fan Function This option is used to enable or disable smart fan function. If your fan is 4 pin fan, you'd better enable this for suitable temperature and low fan noise. Set "CPU Smart Fan Function"/"System Smart Fan Function"/"NB Fan Function" to [Enabled], the following items appear: ► Off PWM Temperature It allows you set a temperature value from which smart fan stops its operation. ► Start PWM Temperature It allows you set a temperature value from which smart fan starts its operation. ► Start PWM Value It allows you to set an initial PWM value to drive the fan when the temperature reaches Start value and smart fan begins its operation. The higher PWM value can achieve the faster fan 41