Foxconn A76GMV English Manual - Page 45
USB Configuration, SuperIO Configuration
View all Foxconn A76GMV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
3 USB Configuration CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc. USB Configuration USB Configuration Help Item USB Devices Enabled : Options None Disabled OnBoard USB Controller [Enabled] Enabled USB 2.0 Controller [Enabled] USB 2.0 Controller Mode [High Speed] Legacy USB Support [Enabled] Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► OnBoard USB Controller This item is used to enable or disable the onboard USB controller. ► USB 2.0 Controller This item is used to enable or disabled the enhanced host controller interface for USB. ► USB 2.0 Controller Mode This item is used to set the transmission rate mode of USB 2.0. This function only works underDOS mode. The available settings are: [High Speed] in 480Mbps; [Full Speed] in 12Mbps. ► Legacy USB Support This item is used to enable the support for USB devices on legacy OS. If you have a USB keyboard or mouse, set to auto or enabled. SuperIO Configuration CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc. SuperIO Configuration SuperIO Configuration Help Item Serial Port1 Address [3F8/IRQ 4] Allows BIOS to select Serial Port1 Mode [Normal] serial port1 base address. Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults 38