Foxconn A88GA-S English Manual. - Page 42
IDE Configuration
View all Foxconn A88GA-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
► OnBoard LAN Boot ROM This item is used to enable or disable the onboard LAN boot optional ROM. A LAN boot ROM lets you set up a diskless workstation on the network. By installing a boot ROM in the network board, you can enable a client PC system on the network to be booted remotely. ► HD Audio Controller This item is used to enable or disable the HD Audio Controller. IDE Configuration CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. IDE Configuration IDE Configuration Help Item OnChip SATA Channel [Ena bled] Disabled OnChip SATA Type [Native IDE] I Enabled SATA IDE Combined Mode [Enabled] 3 Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► OnChip SATA Channel [Disabled] : Disable SATA ports 1, 2, 3, 4. [Enabled] : Enable SATA ports 1, 2, 3, 4. ► OnChip SATA Type This item is used to set the operating mode of your SATA ports. Options : [Native IDE]; [RAID]; [AHCI]; [Legacy IDE]. [Native IDE] - This configures the SATA ports to support native IDE mode. [RAID] - When you enable RAID, it means all your SATA drives must also support AHCI. [AHCI] - The Advanced Host Controller Interface (AHCI) specification describes the register level interface for a Host Controller for Serial ATA. The specification includes a description of the hardware/software interface between system software and the host controller hardware. AHCI provides more advanced features including SATA features, but some SATA drives may not support AHCI, unless they are labeled with AHCI support in its specification. If your motherboard supporting AHCI, and you have a SATA device, which also supports AHCI, then you can select IDE option to have fair performance (only PATA, SATA level), or you can select AHCI to get its best performance. [Legacy IDE] - This configures the SATA ports to support legacy IDE mode which is running for old Windows system. ► SATA IDE Combined Mode [Disabled] : Disable SATA 5 and ESATA. [Enabled] : SATA 5 and ESATA are used to simulate two additional IDE ports. 35