Foxconn A88GA-S English Manual. - Page 47

► Start PWM Value It allows you to set an initial PWM value to drive the fan when the temperature reaches "Start PWM Temperature" value. ► Slope PWM Value It is used to set a slope value in PWM/Temperature diagram. The PWM value is subject to the temperature input value by linear changing. BIOS Security Features CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. BIOS Security Features Scurity Settings Help Item Supervisor Password : Not Installed Enter or change the User Password : Not Installed password. Change Supervisor Password [Press Enter] 3 Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► Change Supervisor Password This item is used to install or change supervisor password. After you input Supervisor password, it then will ask you to input user password optionally. Enter New Password : Load Optimal Defaults Optimal defaults are the best settings of this motherboard. Always load the Optimal defaults after updating the BIOS or after clearing the CMOS values. Select this option and press Enter, it will pop out a dialogue box to let you load the defaults. Select and then press to load the defaults. Select and press , it will not load. By this default, BIOS have set the optimal performance parameters of system to improve the performances of system components. But if Load Optimal Defaults? the optimal performance parameters to be set cannot be supported by your hardware devices (for example, too many expansion cards were [OK] [Cancel] installed), the system might fail to work. 40