Foxconn Bloodrage GTI English Manual. - Page 32
BIOS Select Jumper: BIOS_SELECT, Button_En Jumper: BUTTON_EN
View all Foxconn Bloodrage GTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
BIOS Select Jumper: BIOS_SELECT The jumper is used to select the booting from BIOS ROM 1 or BIOS ROM 2. You can refer to the following table for the setting. 2 12 78 BIOS_SELECT BIOS ROM 2 BIOS ROM 1 Definition 1-2 3-4 5-6 (default) 7-8 Description Set Pin 1 and Pin 2 closed Set Pin 3 and Pin 4 closed Set Pin 5 and Pin 6 closed Set Pin 7 and Pin 8 closed Function Force BIOS ROM 1 Force BIOS ROM 2 BIOS select, default is BIOS ROM 1 BIOS select, default is BIOS ROM 2 Button_En Jumper: BUTTON_EN The jumper is used to set whether to enable Clear_CMOS button on the back panel. The recommended setting is "Disable" to prevent CMOS resetting by touching the button on the IO panel accidentally. 1 Enable 2 3 1 Disable 2 3 BUTTON_EN 25
25
2
BIOS Select Jumper: BIOS_SELECT
The jumper is used to select the booting from BIOS
ROM 1 or BIOS ROM 2. You can refer to the
following table for the setting.
Definition
Description
Function
1-2
Set Pin 1 and Pin 2 closed
Force BIOS ROM 1
3-4
Set Pin 3 and Pin 4 closed
Force BIOS ROM 2
5-6
(default)
Set Pin 5 and Pin 6 closed
BIOS select, default is
BIOS ROM 1
7-8
Set Pin 7 and Pin 8 closed
BIOS select, default is
BIOS ROM 2
BIOS_SELECT
1
2
7
8
BIOS ROM 2
BIOS ROM 1
Button_En Jumper: BUTTON_EN
The jumper is used to set whether to enable Clear_CMOS button on the back panel. The recom-
mended setting is “Disable” to prevent CMOS resetting by touching the button on the IO panel
accidentally.
Disable
1
2
3
Enable
1
2
3
BUTTON_EN