Foxconn G41MX-K 2.0 English Manual. - Page 39
► Memory Timing by SPD, ► Memory Hole, ► Initial Graphics Adapter, ► IGD Graphics Mode Select, ► PEG
View all Foxconn G41MX-K 2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
3 can select a value manually such as [667 MHz] or [800 MHz]. ► Memory Timing by SPD This item is used to enable/disable provision of DRAM timing by SPD device. The Serial Presence Detect (SPD) device is a small EEPROM chip, mounted on a memory module. It contains important information about the module's speed, size, addressing mode and various other parameters, so that the motherboard memory controller (chipset) can better access the memory device. ► Memory Hole This item is used to determine whether the 15M-16M address field of memory is reserved for the ISA expansion card. ► Initial Graphics Adapter This item is used to choose the initial graphics controller which will be used as the primary boot device. ► IGD Graphics Mode Select This item is used to select the amount of system memory used by internal graphics device. ► PEG Port This item is used to enable/disable PCI Express graphics port. 32