Foxconn G41MXP English Manual. - Page 46

3 S5 - The S5 state is similar to the S4 state except that the OS does not save any context. The system is in the "soft" off state and requires a complete boot when it wakes. Software uses a different state value to distinguish between the S5 state and the S4 state to allow for initial boot operations within the BIOS to distinguish whether or not the boot is going to wake from a saved memory image. ► ACPI Suspend Type This item is used to set the energy saving mode of the ACPI function. When you select "S1 (POS)" mode, the power is always on and computer can be resumed at any time. When you select "S3 (STR)" mode, the power will be down after a period of time. The status of the computer before it entering STR will be saved in memory, and the computer can quickly return to previous state when the STR function wakes. ► HPET HPET stands for High Precision Even Timer. If you have the HPET disabled, then windows does not have access to it and therefore falls back to less accurate timing methods. This item is used to enable or disable the HPET Support. ► Resume by Ring This item is used to enable/disable the modem of serial port to generate a wake up from an ACPI sleep state. ► Resume by LAN This item is used to enable/disable the LAN device to generate a wake up. ► Resume by PCIE PME This item is used to enable/disable a PCI Express device to generate a wake up. ► Resume by PCI Card This item is used to enable/disable a PCI card to generate a wake up. ► Resume by USB Devices This item is used to enable/disable the USB keyboard or mouse to generate a wake up. ► Resume by PS2 Keyboard This item is used to enable/disable the PS2 keyboard to generate a wake up. ► Resume by PS2 Mouse This item is used to enable/disable the PS2 mouse to generate a wake up. ► Resume by RTC This item is used to enable/disable RTC alarm event to generate a wake up. RTC is system real time clock. 39