Frigidaire FAA055P7A Use and Care Manual - Page 8

Air Conditioner Features (continued) SLEEP FEATURE: YOU WILL SEE: DO THIS: PRESS SLEEP BUTTON LIGHT On Note: In this "MODE" the selected temperature will increase by 2 degrees F 30 minutes after the mode is selected. The temperature will then increase by another 2 degrees F after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the originally selected temperature. This ends the "Sleep" MODE and the unit will continue to operate as originally programmed. The "Sleep" MODE program can be cancelled at any time during operation by again pressing the "Sleep" button. CHECK FILTER FEATURE: YOU WILL SEE: LIGHT On Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation. The LED (light) will illuminate after 250 hours of operation. To reset after cleaning the filter, press the "Check Filter" button and the light will go off. CLEAN AIR FEATURE (on some models): DO THIS: PRESS CLEAN AIR BUTTON YOU WILL SEE: LIGHT On Note: When this feature is "ON", the electronic air purifier is energized to remove pollen and impurities from the air. To cancel this feature, press the Clean Air button (the LIGHT will turn off). Note: This feature can be activated on the unit touchpad ONLY. 8