Frigidaire FAFW4221LB Wiring Diagram (All Languages) - Page 1
Frigidaire FAFW4221LB Manual
View all Frigidaire FAFW4221LB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Washer Tech Data Sheet This information is intended for Qualified Technicians Only. CAUTION: DISCONNECT ELECTRICAL CURRENT BEFORE SERVICING Please Return This Sheet to its Envelope in the Product for Future Reference Contents Page Error code explanation 1 Diagnostics 2 Error Code Chart 3 Tests 4-5 Français 6-10 Español 11-15 Wiring Diagram 16 READING ERROR CODES: 1. Wake the washer by pressing any button. 2. Wait 5 seconds. 3. Press and HOLD the Start/Pause and Cancel buttons simultaneously. As long as the buttons are held, the failure code will appear in the display as an E followed by two numbers, a number and a letter or two letters. The control will beep. Troubleshoot the problem by using charts on the pages 3-5. NOTE: During normal operation, the display may show: "cd" - cool down (Sanitary cycle) "do" or "dr" - door problem. "Err" - an error has been detected. "LOC" - control lock is activated. "PAU" - cycle has been interrupted. To clear latest stored error code: • Turn the Program Knob to the start position of the cycle furthest to the left • Press Start/Pause to start the cycle and save it. • Press Cancel to stop the cycle and turn off the LEDs. • Press any button (except the cancel button) to wake up the control. • Within 5 seconds, press and hold the Option and Start/Pause buttons until LEDs start sequentially chasing, then release buttons. • Turn the program knob clockwise 7 clicks from the Start Position. The control will signal the last error code. • Press and hold the Options and Start/Pause buttons for 3 seconds. The code will be cleared. • Exit Diagnostic Mode to return the washer to normal operation. a) Unplug the power cord, wait 5-8 seconds, then reconnect the power cord OR b) Turn the program knob clockwise 2 or 3 clicks after the Start Position. Press Options and Start/Pause buttons together for a few seconds until wash cycle LEDs appear. 1 137312800A (1003)