Frigidaire FAM156R1A Installation Instructions - Page 2
Tools Required, Hardware in plastic bag - air conditioner
UPC - 012505271823
View all Frigidaire FAM156R1A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
4. CHECK FOR ANYTHING THAT COULD BLOCK AIRFLOW - check area outside of window for things such as shrubs, trees, or awnings. Inside, be sure furniture, drapes, or blinds will not stop proper air flow. 5. Check the available electrical service - power supply must be the same as that shown on the unit serial nameplate. (See Owner's Guide for serial plate location.)Power cord is 48"long. Be sure you have an outlet near. All models have a 3-prong service plug to provide proper service and safe positive grouding. Do not change plug in any way. Do not use an adapter plug. If your present wall outlet does not match your plug, call a qualified electrician to make the needed change. WARNING Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord. Grounding type wall receptacle Do not, under any circumustances, cut, remove, or bypass the grounding prong. Power supply cord with 3-prong grounding plug and current detection device 6. Carefully unpack air conditioner - remove all packing material. Protect floor or carpet from damage. Two people should be used to move and install unit. Tools Required a large flat blade screwdriver tape measure adjustable wrench or pliers pencil Level Socket wrenches Phillips screwdriver Hardware (in plastic bag) Qty. Washer Head Locking Screw For window panels 2 3/4" Long HexHead Screw 3 Safety Lock 1 1/2" Long Screw and locknut 4 ea. 3/4" Long Flat 2 ea. Head Bolt and Locknut Sill Angle Bracket 2 Long hex-head locking screw for top angle, side 10 retainer 5/16" Long