Frigidaire FAM156R1A Installation Instructions - Page 7

NOTE: If wall thickness is 8-1/2" or more, add aluminum flashing over bottom of frame opening to assure no water can enter area between inner and outer wall. FIG.2 1"LONG WOOD SCREW CAULK AS REQUIRED ALUMINUM FLASHING OVER BOTTOM OF FRAME OVER 81/2" 3 Prepare and Install Cabinet Refer to Step 4 of Window Mounting for assembly of support brackets.A wooden strip nailed to the outside wall should be used in conjunction with sill support angle brackets. 1. Slide chassis from cabinet. Refer back to Step 1 of Window Mounting. 2. Place cabinet into opening with bottom rail resting firmly on bottom board of wooden frame. 3. Position cabinet to achieve proper slope for water removal. (See FIG.1 below.) FIG.1 5/16" TO 3/8" 3/4"PLUS TRIM THICKNESS SEE PARA 5 Support brakcet Wooden strip 5. Screw or nail cabinet wooden frame using shims if frame is oversized, to eliminate distortion. Remember to maintain proper slope as described in Step 3. LEVEL 4. Secure bottom rail to wood frame with two large wood screws 1"(2.5 cm)long using the two holes in the bottom of the channel resting on frame.(See FIG.2 following) 6. Install chassis into cabinet by following all steps in Step 8 of Window Mounting.(continued) 7