Frigidaire FARE4044MW Installation Instructions (English, Español, Fr - Page 10
Important, Warning
View all Frigidaire FARE4044MW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
INSTALLATION REQUIREMENTS Clearance requirements IMPORTANT DO NOT INSTALL YOUR DRYER: 1 In an area exposed to dripping water or outside weather conditions. 2 In an area where it will come in contact with curtains, drapes, or anything that will obstruct the flow of combustion and ventilation air. 3 On carpet. Floor MUST be solid with a maximum slope of 1 inch (2.54 cm). MINIMUM INSTALLATION CLEARANCES - Inches (cm) SIDES REAR TOP FRONT Alcove 0" (0 cm) 0" (0 cm)* 23" (58.5 cm) n/a Closet 0" (0 cm) 0" (0 cm)* 23" (58.5 cm) 1" (2.5 cm) * Dryer must be vented straight back to achieve 0" (0 cm) rear installation. 0" (0 cm) 0" (0 cm) 1" (2.5 cm) 0" (0 cm) WARNING EXPLOSION HAZARD Do not install the dryer where gasoline or other flammables are kept or stored. If the dryer is installed in a garage, it must be a minimum of 18 inches (45.7 cm) above the floor. Failure to do so can result in death, explosion, fire or burns. 23" (58.5 cm) Dryer Dimensions 27" (68.5 cm) 50" (127 cm) to clear open door 37" (94 cm) 43" (109 cm) 1.6" (4 cm) electrical supply on rear of unit1 gas supply pipe on rear of gas unit 3.75" (9.5 cm) 13.50" (34.5 cm) to center of rear vent 1Power supply cord length on gas unit approximately 60 inches (152.5 cm). 10 centerline height for rear vent 3.7" (9.5 cm) floor line 29" (73.5 cm) to front of closed door