Frigidaire FASE7073LR Installation Instructions (All Languages) - Page 20
Reassembling the door
UPC - 012505382444
View all Frigidaire FASE7073LR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
REVERSING DOOR Reassembling the door 1 Lift the inner glass ring. Rotate it 180 degrees, reinstall on outer door, lining up indicators - "LH" for left-hand hinge or "RH" for right-hand hinge. 3 Replace indented head screws (no. 1-5) removed earlier. Take care not to strip out the plastic holes. 4 Replace pan head screws (no. 6-7) removed earlier. Take care not to strip out the plastic holes. no. 1-5 no. 6-7 2 Rest the opening of the inner door at a 90 degree angle on the supports for the hinge cutout cover. Pivot the inner door down onto the outer door. 5 Locate new metal strike supplied with dryer manuals. Grip new strike with pliers as shown below. Firmly insert the strike so it is oriented vertically. 20
20
REVERSING DOOR
Reassembling the door
no. 6-7
no. 1-5
1
Lift the inner glass ring. Rotate it 180 degrees,
reinstall on outer door, lining up indicators - “LH”
for left-hand hinge or “RH” for right-hand hinge.
2
Rest the opening of the inner door at a 90 degree
angle on the supports for the hinge cutout cover.
Pivot the inner door down onto the outer door.
3
Replace indented head screws (no. 1-5) removed
earlier. Take care not to strip out the plastic holes.
4
Replace pan head screws (no. 6-7) removed earlier.
Take care not to strip out the plastic holes.
5
Locate new metal strike supplied with dryer
manuals. Grip new strike with pliers as shown
below. Firmly insert the strike so it is oriented
vertically.