Frigidaire FCRG3062AS Complete Owners Guide - Page 13
Before Setting Surface Controls, Caution
View all Frigidaire FCRG3062AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
13 BEFORE SETTING SURFACE CONTROLS Gas surface burner types The cooktop is equipped with gas surface burners with different BTU ratings. The ability to heat food quickly and in large amounts increases as the burner size increases. • Small burners are best used for low-flame heating of small amounts of food. • Standard burners can be used for most surface cooking needs. • The largest burner is best used for bringing large quantities of liquid rapidly up to temperature or when preparing larger quantities of food. The large burner is located at the right front position on the cooktop. Regardless of size, always select cookware that is suitable for the amount and type of food being prepared. Select a burner and set the flame size appropriately for the pan. Never allow flames to extend beyond the outer edge of the pan. Assembly of the Burner Caps Make sure that all of the surface burner caps and surface burner grates are installed correctly and at the correct locations. 1. Remove all packing material from the cooktop area. 2. Make sure burner head and caps are properly placed on the surface burners. Important: The burner head has a hole which fits over the ignitor. Make sure the head fits snugly before placing the burner caps. Note: Unpack the burner grates and position them on the cooktop after the burner heads and caps are properly installed. Burner Cap Burner Head Orifice Holder CAUTION • Do not allow spills, food, cleaning agents, or any other material to enter the gas orifice holder opening. • Always keep the burner caps and burner heads in place whenever the surface burners are in use. • Never place flammable items on the cooktop. Ignitor Figure 1: Burner cap, burner head, ignitor, and orifice