Frigidaire FDSP4501AS Complete Owners Guide - Page 6

OPERATING INSTRUCTIONS Heat Dry The HEAT DRY option in combination with rinse aid will enhance drying performance. HEAT DRY option is available on all cycles. Air Dry The AIR DRY option will reduce temperature in the hot rinse of the selected wash cycle. This option will slightly decrease energy usage but will increase the likelihood that dishware will not be dry. Child Lock Controls To prevent children from accidentally changing the dishwasher cycle or starting the dishwasher, lock the dishwasher controls by pressing the DELAY START pad until the status window displays "loc". To unlock the controls, press the DELAY START pad until "loc" is no longer displayed in the status window. To Cancel a Cycle and Delay Start Both running cycle and delay countdown can be cancelled at any time. Open the dishwasher door and press the START/ CANCEL pad until you hear a tone. The running cycle or delay countdown is cancelled. If desired, a new cycle can now be selected, by pressing START/CANCEL pad and closing the door immediately, the new cycle will begin. To Cancel a Setting If you have selected your cycle and options and decide to cancel, by pressing the START/CANCEL pad, the unit will go into a stand-by mode, which all LEDs will go out. Delay Start The DELAY START option allows you to automatically delay starting your dishwasher from 1-24 hours. Select your desired cycle and options, then press the DELAY START pad until the desired delay time displays in the status window. The LEDs of selected cycle and options are illuminated. The status window displays the delay time and then displays 'Press Start'. To start the delay countdown, press START/ CANCEL pad and close door immediately. The status window displays 'Close' after the START/CANCEL pad is pressed. A tone will sound indicating that the countdown has started after the door is closed. The selected cycle starts when the countdown is completed. Opening the door during cycle If door is opened while a cycle is running or delay is counting down, the dishwasher will stop running. The LEDs of selected cycle and options are illuminated, the status window displays the remaining cycle time or delay time and displays 'Press Start'. To resume, press START/CANCEL pad and close the dishwasher door immediately. The status window displays 'Close' after the START/CANCEL pad is pressed. A tone will sound indicating that the dishwasher will begin running from the point of interruption after the door is closed. If the dishwasher door is kept open for too long, or the door is closed without pressing START/CANCEL pad, the running cycle or delay countdown will be cancelled. Status Indicator Lights The CLEAN light will remain on after door is opened. When the SANITIZE option is selected and the criteria is met, the Sanitized indicator will display and remain on after the door is opened. If the sanitization criteria is not achieved, the indicator will not display. This can happen if the cycle is interrupted or if the sanitization temperature could not be reached due to incoming water temperature significantly below 120°F. 6