Frigidaire FDSP4501AS Complete Owners Guide - Page 7
Error Code, Status Window, User Instruction Code, Displayed, Problem, Solution
View all Frigidaire FDSP4501AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Status Window OPERATING INSTRUCTIONS The STATUS window, available on some models, indicates the following activity: 1-24h Number of delay start hours. The last hour will count down in minutes. CLOSE Close will scroll across the status window indicating the door needs to be closed. MINUTES Number of minutes left in cycle L0-L6. (1-199). Level of Rinse Aid dosage. User Instruction Code Instruction Problem/Condition Code Displayed Solution Close PF This indicates the door Ensuring the door is properly latched will clear the has been left open or not display. This does not indicate a problem with your properly latched. dishwasher and service will not need to be contacted. Soft Power Failure: PF is displayed if a power outage occurs during a wash cycle. The wash cycle will be paused temporarily and resume once power is restored if the door has not been opened. Hard Power Failure: A hard power failure means the unit will not operate until power is restored. Pressing start within 18 hours of loss of power will resume power at the point of cycle interruption. Error Code Displayed Error Code* Problem Solution i10 A low fill has been detected. Look for a pinched water supply line, or water shutoff is not completely opened. i20; i40; iF0 Clogged filters or a restricted drain line has been detected. Check and clean both filters and sump area and check for a pinched or blocked drain hose. If the drain line is attached to a disposer, check that the knockout plug has been removed. i30 A leak or overflow of Look for loose connections at the water inlet valve and water has been detected ensure the unit is properly leveled. in the bottom pan. i50 A problem has been Pressing the cancel button or turning power off at the detected with the drain breaker for 5 min. should clear this error code and the or wash motor. unit can be restarted. i60 A problem has been detected with the water If this does not resolve the problem, service will need to be called. heating system. iC0 A problem has been detected with the electronic control system. *In all Error Code instances, if Pressing the cancel button or turning power off at the breaker for 5 min. does not resolve the problem, contact the Frigidaire Customer Care Center at 1-800-944-9044. 7