Frigidaire FEB30S5GC Timer Guide (Timer Guide) - Page 1

ELECTRONIC OVEN CONTROL Control Pad Functions Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the various functions of the oven as described below. Note: The graphics on your timer may not look exactly like the one shown. This doesn't change the way it operates. Note: The oven function will not work if the time of day clock is not set. Speed Bake Pad- Used to enter the speed bake mode temperature (some models). Speed Clean Pad- Used to select the speed clean cycle (some models). Bake Time Pad- Used to enter the length of the baking time. Up and Down arrow pads- Used along with the function pads to select oven temperature, cooking time, start time (when programming an automatic start time), time of day, clean time and minute timer. Feature indicator lights- These light show which feature is in use. Bake Speed Speed bake clean Bake time Speed Bake Oven Clock Oven light Bake Pad Used to enter the normal baking mode temperature. Broil Keep warm Clean Start time Oven Preheat Door Locked Timer On/Off Clear /Off Controls Clock Pad- Used to set the time of day. Oven Interior Light Pad- Used to turn oven interior light ON and OFF. Clear Pad- Used to clear any function previously entered except the time of day and minute timer. Push Clear pad to stop cooking. Timer Pad- Used to set or cancel the minute timer. The minute timer does not start or stop cooking. Broil Pad- Used to select the variable broil function. Keep Warm Pad- Used to set the Keep Warm feature. Clean Pad Used to select the selfcleaning cycle. Start Time Pad- Used to set the desired start time for baking. Can be used with BAKE TIME to program a delayed bake cycle. Oven, Preheat & Lock lights- The "oven" light indicates that the oven is functionning. The "Preheat" light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The "Door Locked" light will flash until the door locks when the self-clean cycle is in use. It glows constantly after the door locks (some models). The oven can be programmed to: Bake normally, Speed Bake, Keep warm, Time Bake,Delay Start (delayed bake), Broil, Clean and Speed Clean. Note: Push buttons or pads may be shaped differently. For a silent control panel: When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent operation. To tell if your oven is set for normal or silent operation push and hold START TIME pad for 7 seconds. "- -" or "SP" appears in the display. Within 5 seconds, press the UP or DOWN ARROW pad to switch between normal sound operation and silent operation mode. The display will show either "- -" or "SP". Wait 5 seconds to return to normal operating mode. Note: If "SP" appears, the control will operate with normal sounds and beeps. If "- -" appears, the control is in the silent operation mode. Temperature Conversion (Fahrenheit / Celsius) Versión en español Si desea obtener una copia en The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 288°C). español de este Manual del Usuario, sírvase escribir a la dirección que se incluye a To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode): continuación. Solicite la P/N 318200189E. 1. Press and hold BROIL pad for 7 seconds until °F or °C appears in the display. 2. Press the UP or DOWN ARROW pad to change °F to °C or °C to °F. 3. Wait 5 seconds to accept the changes or press CLEAR/OFF pad to accept the changes. Spanish Owner's Guides Frigidaire Company P. O. Box 9061 Dublin, Ohio 43017-0961 1 318200189 (0406) Rev. A