Frigidaire FEQ1442ES Operating Instructions - Page 1

DRYER OPERATING INSTRUCTIONS Before Operating Your Dryer Read your dryer Owner's Guide. It has important safety and warranty information. It also has many suggestions for best drying results. To reduce the risk of fire, electric shock or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in your dryer Owner's Guide before operating this appliance. Operating Steps Read "Drying Procedures" in your Owner's Guide. It explains these operating steps in detail. 1. Prepare items for drying. 2. Check that lint screen is clean and in place. 3. Load the dryer. If desired, add a dryer fabric softener sheet. Close the door. 4. Select the cycle and drying temperature for each load. To change the temperature, turn the TEMP knob to the desired temperature. Follow the same steps to delete an option. If a dryness level or option is not available for a cycle,it will not light. 6. The changes you make will be remembered the next time that cycle is selected. See the "Dryer Settings Chart" for more details. 7. Press START to begin cycle. • To pause the cycle or change settings, press PAUSE/CANCEL once.To resume the cycle, press START again. • To stop or change the cycle, press PAUSE/CANCEL twice. 8. A signal will sound at the end of the cycle and periodically during Press Saver when the Cycle Signal option is selected. When the cycle ends, remove items immediately and hang or fold. 9. Clean the lint screen after every load. Cycle Selection For best results, follow the fabric care label instructions on items to be dried. Auto Dry Auto Dry cycles take the guesswork out of drying time. The load will automatically be dried at the selected temperature to the desired dryness level. The dryer senses the moisture level of the load as it tumbles through heated air. Auto Dry cycles save time and energy and protect fabrics. When the load has reached the selected dryness level, it will continue to tumble, unheated, during a Cool Down period. This helps reduce wrinkling and makes items easier to handle during unloading. Drying time varies depending on size and dampness of load, weight and fabric type. Room temperature and humidity, type of installation and electrical voltage or gas pressure can also affect drying time. Towels Select this Auto Dry cycle for towel loads. 5. A suitable dryness level and options will automatically be displayed for each cycle. To change the dryness level, press DRYNESS until the desired selection is made. To select an option, press OPTIONS until the indicator for a desired option flashes and press SELECT. Normal Select this Auto Dry cycle for cotton items. Perm Press Select this Auto Dry cycle to dry cottons and blends with a no-iron finish. PN 134420600C (0412)