Frigidaire FFAD6022W1 Complete Owners Guide - Page 8

Operating Instructions Fault Codes 1. If the display reads "AS" or "ES" , a sensor has failed. Contact your Authorized Frigidaire Service Center. 3. If the display reads "P2", Bucket is full or removed or not in right position. Replace the bucket in the right position. Removing Collected Water 1. Emptying the Bucket: a. When the bucket is full, the unit will shut down and the BUCKET FULL indicator will illuminate. b. Do not move the unit at this time otherwise water may spill on the floor. c. Press sides of bucket gently to unclip the bucket from the unit. d. Remove the bucket as shown in the photographs below and empty the bucket. e. Replace the empty bucket back into the unit and once seated correctly, the unit will start up again. f. You should hear a click when the bucket is in the correct position. 8 2019 Electrolux Home Products, Inc. All rights reserved.