Frigidaire FFAP7033T1 Use and Care Guide - Page 7
Fault Codes - drain hose
View all Frigidaire FFAP7033T1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Fault Codes Fault Codes (continued) 2.If the display reads "F0" , check the following operating conditions. Outlet voltage should be 115V±10% and the surrounding temperature should be with in the range of 41 °F (5 °C) to 90 °F (32 °C). Unplug the unit and plug it in again under normal operating conditions. If the "F0" code persists, contact your Authorized Frigidaire Service Center. F0 3.If the display reads "PU", check the following operating conditions: a. Make sure the pump drain hose is well connected. b. Check that the hose is not blocked, kinked or frozen. c. Remove and empty the water bucket to check the bucket pickup for blockage of dirt or alge. d. Turn off the unit and restart it under normal operating conditions. e. Unplug the unit and plug it in again under normal operating conditions. If the "PU" code persists, contact your Authorized Frigidaire Service Center. PU NOTE: 1.If your unit does not pump water, you need to check below first: a. Check the pump is turned on. b. The unit will not pump untill it reaches the full bucket point. 2.Please follow the steps described in "Emptying the Bucket" to remove and empty the water bucket. 3.Please follow the steps described in "Care and Cleaning" to clean the unit regularly to prevent dirt or alge. 2009 Electrolux Home Products, Inc. All rights reserved. 7