Frigidaire FFGH3054UW Complete Owners Guide - Page 27
To set a self clean cycle
View all Frigidaire FFGH3054UW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
To set a self clean cycle: 1. Press Self Clean. --- appears in the display. 2. Press until 3:00 appears in the display for a 3 hour self clean process, or push until 2:00 appears in the display for a 2 hour self clean process. 3. As soon as the controls are set, the motor driven lock will begin to close automatically and the door locked indicator light will flash. Do not open the oven door while the light is flashing (allow about 15 seconds for the oven door to lock). 4. CLn will appear in the display during the self clean cycle, and the door locked light will glow until the self cleaning cycle is complete or cancelled and the oven temperature has cooled. When the self clean cycle has completed: • The time of day will appear in the display window, and the Clean key and door locked light will continue to glow. • Once the oven has cooled down for about 1 hour and the door locked light has gone out, the oven door may be opened. • To avoid possible burns, use care when opening the oven door after the self cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape. To stop or interrupt a self clean cycle (once it has been activated): 1. Press OFF. 2. Once the oven has cooled down for about 1 hour and the door locked light has turned off, the oven door can be opened. 3. Restart the self clean cycle once all conditions have been corrected. SETTING OVEN CONTROLS NOTE SCC message in display If the cooktop is used during a self-clean cycle, the oven may turn off. The oven control display will show "SCC" for 5 seconds. The oven door will remain locked until the oven has cooled down below cleaning temperature. If the oven is below cleaning temperature, the user can start another clean cycle immediately. If the oven is in cleaning temperature range, another self-clean cycle can be set once the door unlocks (up to 4 hours). Setting Delay Start Self Clean To start a delay self clean with default clean time of 3 hours and a start time of 9:00 o'clock: Be sure the clock is set with the correct time of day, the oven is empty, and all oven racks are removed. Be sure oven door is completely closed. 1. Press Start Time and scroll key. to 9 0 0 and release 2. Press Self Clean. --- appears in the display. 3. Press until 3:00 appears in the display for a 3 hour self clean process, or push until 2:00 appears in the display for a 2 hour self clean process. 4. The motor driven lock will begin to close automatically and the door locked indicator light will flash. Do not open the oven door while the light is flashing (allow about 15 seconds for the oven door to lock). 5. CLn will appear in the display during the self clean cycle, and the door locked light will glow until the self cleaning cycle is complete or cancelled and the oven temperature has cooled. IMPORTANT If the cooktop is used during a self-clean cycle, the oven may turn off. The oven control display will show "SCC" for 5 seconds. The oven door will remain locked until the oven has cooled down below cleaning temperature. If the oven is below cleaning temperature, the user can start another clean cycle immediately. If the oven is in cleaning temperature range, another self-clean cycle can be set once the door unlocks (up to 4 hours). 27