Frigidaire FFHP093CS2 Complete Owners Guide - Page 11
Remote control
View all Frigidaire FFHP093CS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
When should the batteries be replaced 1. There is not a "beep" anymore from the indoor unit when using the control remote or the signal light indicator does not light. 2. The indoor unit does not respond to the remote control commands to activate the programs. To replace batteries 1. Slide out the battery compartment cover ( located at the front of the remote control). 2. Install two AAA batteries in the compartment (indicated in the drawing located inside the compartment). 3. Slide on the battery component cover. 4. If the remote control is not operated for long period of times, batteries should be discarded. Remote control instructions 1. The signal reach distance of the remote control to the receiver that is inside the indoor unit of the air conditioner is 32 feet. Any obstruction placed between the receiver and the remote control can cause interference, limiting the capacity of the programming. 2. Any time when a button is pressed on the remote control, the air conditioner emits a "beep" that indicates that a command has been received and transmitted to the indoor unit. 3. When selecting the function of timer, the remote control (automatically) sends a signal to the indoor unit at the specific period. If the remote control is left in a position that the signal is blocked, a 15 minute delay can be produced. Reinstall battery Remove Cover of battery box Attention!! 1. When replacing batteries, do not use old batteries or a different type battery. This may cause the remote control to malfunction. 2. If you do not use the remote controller for several weeks, remove the batteries. Otherwise battery leakage may damage the remote controller. 3. The average battery life under normal use is about 6 months. 4. Replace the batteries when there is no answering beep from the indoor unit or if the transmission indicator fails to light. Remote control 10