Frigidaire FFHP093CS2 Complete Owners Guide - Page 15

4. Press the ON/OFF button, the operation lamp lights and the air conditioner start to operate as your settings. Press the ON/OFF button again to stop this unit operation. * Note: Only for models with heating function. **Note: The FAN ONLY mode can not be used to control the temperature. While in this mode, only steps 1,3 and 4 may be performed. Cooling Fan only Cooling Fan only Cooling DRY (DEHUMIDIFICATION) operation The dry mode will automatically select the drying operation based on the difference between the set temperature and the actual room temperature. The temperature is regulated while dehumidifying by repeatedly turning on and off of the cooling operation or fan only. In the Dehumidifying mode, you can not switch the fan speed. It has already been automatically set at low speed. 1. Press the MODE button to select DRY. 2. Press the "^"/"v" button to set the desired temperature from 61 ºF to 86 ºF. 3. Press the ON/OFF button, the operation lamp lights and the air conditioner starts to operate in the DRY mode. FAN SPEED is Low. Push the ON/OFF button again to stop this unit operation. Attention!! Due to the difference between the set temperature of the unit and the actual indoor temperature, the Air Conditioner in DRY mode will automatically switch the operation modes between COOL and FAN ONLY many times. Room Temperature Set temperature Time DRY FUNCTION Air flow direction adjustment Press the SWING button " " once and quickly, the air flow direction setting feature of the louver is activated. The horizontal louver would swing up/down automatically. Press it again to stop at its last place. Attention!! If the louver oscillates or moves in a position that could affect the cooling or heating (only for models with heating function) of the air conditioner, the direction of the oscillation/movement would alter automatically. How the air conditioner works 14